UP Xtreme i11 0000 UEFI BIOS v1.6

Always on top – Important: For UPX i11 0001 version. Please use another BIOS version.

###########################################################################
UPX-TGL01
###########################################################################
Microcode:
M80806C0_00000068
M80806C1_0000009A
MC2806C2_00000022
—————————————————————————
BIOS Updating Procedure:
1. Enter BIOS setup page ‘Firmware Update Configuration’ in ‘PCH-FW
Configuration’ of Advanced
2. Enable BIOS setup item ‘Me FW Image Re-Flash’
3. Set storage which contains target BIOS package as first boot option
4. Save Changes and Reset
5. Boot to Shell directly and execute go.nsh

* ‘Me FW Image Re-Flash’ will be reset to disabled after system reset so
you have to flash BIOS directly once ‘Me FW Image Re-Flash’ was enabled.
—————————————————————————
###########################################################################
===========================================================================
BIOS Name: [UXTGBM16.bin] (based on [UXTGBM15])
Checksum: [32]MB:[16F2]h
Sign-on Message:
UPX-TGL01 R1.6 (UXTGBM16)(03/31/2022)

Changed:
Corrected Voltage of I2C pins on HAT during BIOS POST Phase
===========================================================================

===========================================================================
BIOS Name: [UXTGBM15.bin] (based on [UXTGBM14])
Checksum: [32]MB:[11F5]h
Sign-on Message:
UPX-TGL01 R1.5 (UXTGBM15)(03/09/2022)

Changed:
1. Fixed “Audio Advanced Mode” Function Failed on some Specific Conditions
2. Patch system hang up during on/off test in UEFI shell issue
===========================================================================

===========================================================================
BIOS Name: [UXTGBM14.bin] (based on [UXTGBM13])
Checksum: [32]MB:[2DD3]h
Sign-on Message:
UPX-TGL01 R1.4 (UXTGBM14)(11/05/2021)
Changed:
1. Update CPU microcode
2. Fix BFPI FAN speed is not 0 when there is no FAN
3. Set Flash Configuration to Dual I/O with 50MHz Read Clock Frequency
4. Add SOF key for cAvsImage0Manifest
5. Add BIOS setup item “Audio Advanced Mode”
===========================================================================

UXTGBM16
UXTGBM16
Tags