Note:

Please do “Entire Firmware Re-Flash” if your current version is earlier than R0.3

Entire Firmware Re-Flash :

• Step 1: Enter BIOS Setup by Administrator Mode
• Step 2: Change Option; “Me FW Re-Flash” from Disabled to Enabled
  (which is located at Main -> CRB Setup -> CRB Advanced -> PCH-FW Configuration -> Firmware Update Configuration)
• Step 3: Save & Reset, and boot to UEFI Shell directly
• Step 4: Execute the batch file; GO_Entire.nsh
• Step 5: After all processes completed, the system must power off to have the changes take effect!

BIOS update SOP –

1. Put files from the BIOS package into UEFI bootable USB drive.
2. Power on board with a USB drive attached.
3. Select boot for shell loader in USB drive (or Built-in Shell if present).
4. Move operating directory to the USB drive (fs1 or other labels)
   SHELL> fs1:
5. Enter the directory with BIOS file and update batch
6. To update your current BIOS: fs1>GO.nsh
7. Confirm update procedure is completed without problem
8. Reboot system